Search Results

Dimensions:

"•Grit: 180
•Size: 25lb"

Notes:

Replaces Locke #(s) 725180.

Applications:

Price: $88.94

Dimensions:

"•Grit: 50
•Size: 25lb"

Notes:

Replaces Locke #(s) 725050.

Applications:

Price: $88.94

Dimensions:

"•Grit: 80
•Size: 25lb"

Notes:

Replaces Locke #(s) 725080.

Applications:

Price: $88.94

Dimensions:

"•Size: 1"" x 50 Yards
•Grit: 120"

Applications:

Price: $29.18

Dimensions:

"•Rated Lift Capacity: 1,000 lbs
•Overall Width: 29""
•Overall Width (with side extensions): 53""
•Overall Height (fully raised): 32""
•Overall Height (fully lowered): 7-3/4""
•Depth (front to back): 84""
•Drop Safety Control Safety Lock: 1-1/4"" each
•Approx. Lift Time (loaded): 20 seconds
•Approx. Drop Time (loaded): 20 seconds
•Maximum Supplied Air Pressure: 100 PSI
•Operator Controls: Foot pedal to raise and lower
•Loading Ramps: 2, provided to assist with staging loading equipment onto lifting platform
•Shipping Weight: 696 lbs"

Notes:

For those shops tight on space. Ideal for quick diagnostics and minor repairs. Lifts up to 1,000 pounds on the 84" long table top. Great for generators, walk-behind equipment and snowthrowers. Technicians increase their job efficiency a minimum of 20%-30% with a lift; labor recovery rates increase. 20%-50% productivity improvement. No special instruction or wiring required; operates on 100 PSI air supply.

Applications:

Price: $1,430.64

Dimensions:

"•Bezel Chrome Diameter: 2-1/4""
•Case Metal Diameter: 2-1/32
•Length: 1-1/8""
•Depth: 1""
•(2) Mounting Holes: 1/16""
•Studs: 5mm Diameter"

Notes:

"Designed for oem installation. Tightly sealed, unbreakable plastic window. Operates on 6 or 12 volt. registers negative 15 thru positive 15 amps.
Replaces MTD #(s) 725-0119, 725-3023, 925-0119, 925-3023, 925-3141; Noma #(s) 39463."

Applications:

Price: $18.61

Dimensions:

"•Size: 28"" x 36""
•Color: Blue"

Notes:

Excellent for workshop and general use applications. Keep your clothes clean and looking good. Ties in back.

Applications:

Price: $15.13

Dimensions:

•Output: 14.5 volts dc

Notes:

"Universal battery charger for Toro/Wheel Horse electric start push mowers. Replaces Ariens, Toro, Lawnboy & others. Connects directly to mating battery plug. Charger plugs into AC outlet. Female terminal is positive & male terminal is negative.
Replaces Ariens #(s) 01126000, 1126000, 71104300; Lawnboy #(s) 92-1743, 94-9164; Toro/Wheel Horse #(s) 92-1743, 94-9164, 104-4216."

Applications:

Price: $32.18

Notes:

Handy pocket size & easy to use tester to check 12 volt battery & generator systems. 5 stage display to indicate system condition. No wires to connect.

Applications:

Price: $52.55

Notes:

An excellent tool in determining the exact replacement belt needed. Measures FHP, power rated, A and B belts up to 100". Measures outside circumference of belt. Reads in 1/2" increments.

Applications:

Price: $75.58

Notes:

Specially designed to fit 99% of all center holes. Made of high quality die cast zinc.

Applications:

Price: $8.36

Notes:

Wall mounted. Fast accurate and professional way to balance lawnmower blades. The magnetic collar holds any blades (with center hole up to 1-1/2" hole in diameter) perfectly on center. It's ball bearing spindle will show even the slightest out-of-balance blade. Tracking arm indicates straightness of blade by matching blade cutting tips to the end of the tracking arm.

Applications:

Price: $242.21

Dimensions:

"•Grinding Wheel: 8"" diameter, 1"" wide
•Dimensions: 17-1/2"" high, 17"" length, 11"" wide."

Notes:

"Heavy-duty, ball bearing, direct drive sealed motor. Heavy, all-steel construction. Easily accessible reverse switch. Includes #750-038 grinding wheel. One year warranty.
Specifications:
motor: 1/2 HP, reversing, 110 volts
grinding discharge: right or left side"

Applications:

Price: $666.34

Notes:

Locks blade to make removal or installation safer & easier. Clamps to mower deck & prevents the blade from rotating.

Applications:

Price: $12.28

Dimensions:

"•ID: 3/8""
•Air Inlet: 1/4"" n.p.t."

Notes:

To blow dust, dirt & shavings.

Applications:

Price: $12.76

Notes:

Detects carburetor leaks instantly. Not compatible and warranty void with equipment using greater than 10% ethanol-blend fuel. Pressure gauge & hose included. 0 to 30 psi.

Applications:

Price: $80.35

Notes:

For repairing #35, #40, #41 & #50 series roller chain. Long, hardened steel punch forces pin all the way out so precisely it never damages the adjacent links. Patented clamping cylinder for perfect alignment.

Applications:

Price: $61.21

Notes:

For use with Beaver Blade.

Applications:

Price: $43.30

Notes:

Hook this pocket-size instrument to the battery of a walk behind, rider or tractor. Test once with engine running & a second time with engine off & starter cranking. Bright light emitting diodes will tell exact condition of battery & capability of charging system. 5 voltage ranges. Checks both 6 & 12 systems. Can also be used to check plug-in battery chargers.

Applications:

Price: $67.20

Notes:

500 volt low amperage meter. Measures any condenser rated .10 to .40 mfd. Operates on 110 volt ac current. Quick & accurate testing.

Applications:

Price: $244.44

Dimensions:

•Diameter: 2-3/4"

Notes:

Reads up to 300 p.s.i. Fits 14mm & 18mm spark plug holes. 3/4" hex at base for installation & removal.

Applications:

Price: $67.53

Notes:

Complete with 7/8" & 1" shaft protectors. Guaranteed to straighten bent crankshafts in most vertical shaft engines without dismantling the engine. Converts instantly to engine repair stand. Average time spent straightening crankshaft is seven minutes. Unique pressure equalizer bolt. Will not straighten short crankshafts. Do NOT use impact.

Applications:

Price: $321.33

Dimensions:

"•Range: 1-1/4"" to 3-1/2""
•Length: 7-3/4""
•Grit: 220"

Notes:

Flexible shaft makes it easy to hone cylinders.

Applications:

Price: $33.86

Notes:

Thoroughly and quickly cleans any lawn mower deck by removing clogged grass. Flexible, curved tip conforms to the underside of the deck without scratching, unlike a putty knife. Long, stainless-steel blade is perfect for cutting through the debris on the mower skirt. New rubber over-grip handle is more comfortable to use.

Applications:

Price: $15.06

Dimensions:

•Length: 13-1/8"

Notes:

"Used to accurately level & measure mower decks on all riding & walk behind mowers. Mower blade cutting height gauge range is 1-1/2"" to 5"".
Replaces John Deere #(s) AM-130907."

Applications:

Price: $10.10

Notes:

"DC input. For commercial equipment. Voltage range 8-32 VDC. Flash alert programmed specifically for your applications service requirements.
Replaces Sen Dec #(s) 804-200."

Applications:

Price: $59.45

Notes:

For all single cylinder and most twin cylinder 4-cycle gasoline engines. Alerts you to lube and oil changes.

Applications:

Price: $74.69

Price: $134.75

Dimensions:

"•(16) Blades: 1/4"" x 1-3/4""
•Thickness: .011"" thru .032"""

Applications:

Price: $17.10

Dimensions:

•Length: 12"

Notes:

Steel reinforced heavy-duty hose. Use with any type hand lever gun.

Applications:

Price: $15.84

Notes:

For use on 4" to 15" rims. Includes a 28" mount/demount tire tool (Tire Snake). Manufactured by Ken-Tool. Works great for a small tire applications such as atv's, small engine, dolleys.

Applications:

Price: $772.40

Notes:

"Holds flywheel for removal of Briggs & Stratton starter clutch. Fits 3 & 3.5 HP engines.
Replaces Briggs & Stratton #(s) 19167."

Applications:

Price: $29.19

Notes:

Holds flywheel for removal of Briggs & Stratton starter clutch. Fits 4 & 5 HP engines.

Applications:

Price: $32.83

Notes:

Holds flywheel for removal of Briggs & Stratton starter clutch. Fits 6, 7 & 8 HP engines.

Applications:

Price: $32.49

Notes:

Universal style. Bolts included.

Applications:

Price: $17.91

Notes:

Fits Briggs & Stratton engines. Place over crankshaft & tap lightly to free flywheel.

Applications:

Price: $9.26

Dimensions:

"•Hex: 1""
•Thread Size: 5/8""-18"

Notes:

"Fits Tecumseh 12, 12.5 & 15 HP engines.
Replaces Tecumseh #(s) 670314."

Applications:

Price: $10.63

Dimensions:

•Thread Size: 7/16"

Notes:

"Fits Tecumseh 3.5 HP engines.
Replaces Tecumseh #(s) 670103."

Applications:

Price: $11.66

Notes:

"Fits Briggs & Stratton models 130000 thru 190000. Helps remove flywheels.
Replaces Briggs & Stratton #(s) 19069."

Applications:

Price: $12.14

Notes:

Designed to fit Briggs & Stratton # 394558 clutch. Aids in removal of Briggs & Stratton starter clutches.

Applications:

Price: $28.21

Dimensions:

Notes:

Briggs & Stratton original part.
Replaces Briggs & Stratton #(s) 791937.

Applications:

Price: $8.60

Dimensions:

"•Size: 6"" Reversible
•Reach: 3-1/2""
•Spread: 0"" -6"""

Applications:

Price: $41.53

Notes:

Standard size. Loads (2) ways. Knurled barrel. Uses 14 oz. cartridges. EZ air vent cap. Safety lock. Sure grip.

Applications:

Price: $25.35

Dimensions:

"•Length: 18""
•Width: 2"""

Notes:

Replaces MTD #(s) 731-1037A, 731-1097A, 731-1097B, 731-1097C, 731-1373, 731-1442A, 731-1537A, 783-0018A, 783-0456A, 783-0477A.

Applications:

Price: $15.61

Dimensions:

"•Diameter: 7""
•Width: 1""
•Center Hole Diameter: 5/8""
•Grit: 60 (fine)"

Notes:

Fits # 752-505 blade grinders. Premium grade. Manufactured in Italy.

Applications:

Price: $45.35

Notes:

Connect one end to coil, other end to spark plug. Window allows you to see the amount of spark.

Applications:

Price: $19.29

Price: $19.83

Notes:

Contains common inch thread size on lawnmowers, tractors, tillers, splitters & outdoor power equipment. Size 1/4-20, 5/16-18 & 3/8-16. Manufactured in Australia.

Applications:

Price: $149.20

Notes:

Contains metric thread sizes most often found on professional chain saws & imported engines. Sizes m5 x 0.8, m6 x 1 & m8 x 1.25. Manufactured in Australia.

Applications:

Price: $167.45